Bender ATICS-2-ISO Series Panduan Memulai Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Beralih Bender ATICS-2-ISO Series. Bender ATICS-2-ISO Series 8 halaman. Automatic transfer switching devices with monitoring functions for unearthed safety power supplies - software version: d333 v1.3x, d334, v1.3x, d335 v1.0x, d308 v1.2x
Juga untuk Bender ATICS-2-ISO Series: Panduan Memulai Cepat (16 halaman)

Halaman Cetak
ATICS-2...-ISO Quick start
5. Dimensions
234
52
220
222

6. Tools required

►
We recommend to use the following tools for connecting the
power section and the control cables:
7.

Removing the terminal covers

2
***
176
14,7
115,3
M5
*
18
**
A
B
B
A
Caution: Risk of destruction by plastering
Liquid plaster may run into the device and the device
may jam.
►
Do not seal the device with plaster.
ATICS® is suitable for DIN rail mounting or screw
mounting on plate. To guarantee the protection
against accidental contact, it is to be installed be-
hind a plastic cover.
*
Additional space required for the auxiliary con-
tact when using a bypass switch
46
** Adapt the cutout to the terminal cover
*** Dimensions for screw mounting on mounting
52
plate
73,5
• Torx® screwdriver T20 or 6.5 x 1.2 mm
• Screwdriver 2.5 x 0.4 mm
• Allen key 4 mm
1.
Push back the locking hook (B) in the middle of the top and
bottom terminal (A) cover by using a screwdriver.
2.
Remove the terminal cover.
ATICS-2-ISO_D00046_02_Q_XXEN/09.2016