BENDIX Intellipark Panduan Operator - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Operator untuk Aksesori Mobil BENDIX Intellipark. BENDIX Intellipark 8 halaman. Electronic parking brake control system bus/non-towing vehicles
Halaman Cetak
Stop on a level surface. Shut off the engine and open the driver-side window to hear
air exhaust from the parking brakes. Perform the following steps:
1.
Attempt to park the vehicle by pulling the parking brake switch. Listen for the
exhaust of air.
2.
If the vehicle did not park, key off the vehicle and "fan down" the air reservoirs
by repeatedly depressing the service brake pedal to automatically apply the
spring brakes.
3.
Chock the wheels.
4.
Turn off the battery power to the vehicle.
1.
Ensure the reservoirs are depleted of air.
2.
Once the reservoirs are depleted of air, remove the wheel chocks prior to starting
the engine.
3.
Start the engine and stay in the driver's seat as the air brake system builds air,
filling the reservoirs.
4.
Keep the brake pedal depressed to hold the vehicle stationary in case the spring
brakes unintentionally release air.
5.
Once the system air is at a normal operating range, the vehicle can be unparked
and driven.
Parking with a Fault
Starting After a Fault
7