BENDIX Intellipark 운영자 매뉴얼 - 페이지 7
{카테고리_이름} BENDIX Intellipark에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. BENDIX Intellipark 8 페이지. Electronic parking brake control system bus/non-towing vehicles
페이지 인쇄
Stop on a level surface. Shut off the engine and open the driver-side window to hear
air exhaust from the parking brakes. Perform the following steps:
1.
Attempt to park the vehicle by pulling the parking brake switch. Listen for the
exhaust of air.
2.
If the vehicle did not park, key off the vehicle and "fan down" the air reservoirs
by repeatedly depressing the service brake pedal to automatically apply the
spring brakes.
3.
Chock the wheels.
4.
Turn off the battery power to the vehicle.
1.
Ensure the reservoirs are depleted of air.
2.
Once the reservoirs are depleted of air, remove the wheel chocks prior to starting
the engine.
3.
Start the engine and stay in the driver's seat as the air brake system builds air,
filling the reservoirs.
4.
Keep the brake pedal depressed to hold the vehicle stationary in case the spring
brakes unintentionally release air.
5.
Once the system air is at a normal operating range, the vehicle can be unparked
and driven.
Parking with a Fault
Starting After a Fault
7