Airwell RC4 Manual Pemrograman dan Operasi - Halaman 7

Jelajahi secara online atau unduh pdf Manual Pemrograman dan Operasi untuk Kontrol Jarak Jauh Airwell RC4. Airwell RC4 14 halaman.

OPERATION PROCEDURE

Press START/STOP button (1) to turn the air conditioner on. The operation

indicator on the air conditioner will light up, indicating that the unit is in

operation. Note that the LCD operation display (13) will always show the last

mode of operation and previous function used.

Follow the instructions if you choose to change the control settings; otherwise,

the air conditioner will start and operate in the same mode and functions

prior to being turned off.

Select the ventilating mode by pressing MODE button (2). Switch to the

desired fan speed by pressing FAN speed button (4).

Select the COOLING mode by pressing MODE button (2). Switch to the

desired FAN SPEED or to AUTO FAN by pressing button (4). Select suitable

temperature setting. By selecting the COOLING mode, the air flap will move

automatically to horizontal air delivery position, optimal for cooling.

This operation starts with the highest air flow in order to quickly lower the

room temperature. It will then automatically switch to the low air flow to

quietly maintain the selected temperature.

Select the HEATING mode by pressing MODE button (2). Switch to the

desired FAN SPEED or to AUTO FAN by pressing FAN button (4). Select

suitable temperature setting. By selecting the HEATING mode, the air flap

will move automatically to vertical air delivery position, optimal for

heating.The HOT KEEP function is provided. The fan will be turned off

when the indoor coil temperature is not sufficiently hot to prevent

uncomfortable cold air drafts. In some models the HOT KEEP function is

operating in AUTO FAN mode only.

This operation starts with the highest air flow in order to quickly raise the

room temperature. It will then automatically switch to a lower air flow to

quietly maintain the selected temperature.