Airwell RC4 Manual Pemrograman dan Operasi - Halaman 9
Jelajahi secara online atau unduh pdf Manual Pemrograman dan Operasi untuk Kontrol Jarak Jauh Airwell RC4. Airwell RC4 14 halaman.
Halaman Cetak
TIMER OPERATION
There are four timers that can be selected on the remote control.Two daily timers (designated as
T1,T2) ,and two optional weekend timers (designated as WKTI, WKT2) .Each timer can be selected
by pressing TIMER button (10). To set each timer use time adjust up and down buttons Hour+ (11)
and Hour- (12) respectively. SET button (17) to enable the timer and/or CLEAR button (18) to
disable the timer.
Indicator (c) on the air conditioner will light up during timer operation.
NOTE: After a power, failure the timer operation is cancelled, timer indicator on the air conditioner
will blink, the unit will be automatically turned to stand-by mode and STAND-BY indicator lights. To
resume the timer operation, follow the instructions below.
A. DAILY TIMER
The daily timers T1 and T2 can be set for ON and OFF separately for two different time periods.
Once the timer is set it will resume operation when initiated.
B. WEEKEND TIMER (OPTIONAL)
The weekend timers WKT1 and WKT2 can be set for ON and OFF separately
for two different time periods for two days only.
It will be effective on the day of setting and on the day after only.
At 24:00 on the second day, the WK timer will not be effective anymore and the daily timer will resume
its effectiveness.
WKTI - effective on the setting day
WKT2 - effective one day after the setting day.
NOTE:
1. During the weekend timer operation, the daily timers will be disabled.
2. The WK timers must be reactivated before every weekend.
C. SELECTING A TIMER
Press the TIMER button (10) to select a timer. Each time the TIMER button (10) is pressed, one of
the four following timer icons will appear on the LCD display.
Press TIMER
button to select
daily timer T1.
1
Icon 1 of Timer T1
will blink
Press TIMER
button to select
daily timer T2.
2
Icon 2 of Timer T2
will blink
Press TIMER
button to select
weekend timer
WKT1
3
Icons 1 and WK
will blink
Press TIMER
button to select
weekend timer
WKT2
4
Icons 1 and WK
will blink.
8