Bendix/King Skymap IIIC Referensi Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Referensi Cepat untuk GPS Bendix/King Skymap IIIC. Bendix/King Skymap IIIC 6 halaman. Global positioning system
Juga untuk Bendix/King Skymap IIIC: Manual (6 halaman), Panduan Pilot (14 halaman)

Halaman Cetak

To go Direct To a waypoint:

1. Press the

point field.

2. Enter desired waypoint using right concentric knobs.

3. Press

to view waypoint information. Press

This initiates the Direct To—your D-bar will be centered, and you're on your

way!

4. Alternatively, display desired waypoint on APT, VOR, NDB or SUP page, or

move the cursor over desired waypoint in the active flight plan, then press

then press

To initialize the position from the SET 1 page:

1. Press the

2. Using the right inner and outer knobs, enter the identifier for the airport where

you are presently located or the identifier of a navaid or other airport which is

close to your present position.

3. Once you have entered the complete identifier, press

change to the waypoint page for the waypoint you entered.

4. If this is the waypoint you intended to enter, press

change back to the SET 1 page.

NOTE: As an alternative, you can also enter the approximate latitude and longi-

tude of your present position directly on the SET 1 page instead of entering a

waypoint.

5. With the right inner knob, position the cursor over Ok?, if it is not already there,

and press

button. The Direct To (DIR) page will be displayed with a way-

to confirm.

button to bring the cursor on the page over the INIT POS: field.

-2-

again to confirm.

. The display will

again. The display will