Bendix/King Skymap IIIC 빠른 참조 - 페이지 2
{카테고리_이름} Bendix/King Skymap IIIC에 대한 빠른 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Bendix/King Skymap IIIC 6 페이지. Global positioning system
Bendix/King Skymap IIIC에 대해서도 마찬가지입니다: 매뉴얼 (6 페이지), 파일럿 매뉴얼 (14 페이지)
![Bendix/King Skymap IIIC 빠른 참조](/uploads/products/server2/1848286/1848286.jpg)
D
D
To go Direct To a waypoint:
D
1. Press the
point field.
2. Enter desired waypoint using right concentric knobs.
F
3. Press
to view waypoint information. Press
This initiates the Direct To—your D-bar will be centered, and you're on your
way!
4. Alternatively, display desired waypoint on APT, VOR, NDB or SUP page, or
move the cursor over desired waypoint in the active flight plan, then press
F
then press
To initialize the position from the SET 1 page:
B
1. Press the
2. Using the right inner and outer knobs, enter the identifier for the airport where
you are presently located or the identifier of a navaid or other airport which is
close to your present position.
3. Once you have entered the complete identifier, press
change to the waypoint page for the waypoint you entered.
4. If this is the waypoint you intended to enter, press
change back to the SET 1 page.
NOTE: As an alternative, you can also enter the approximate latitude and longi-
tude of your present position directly on the SET 1 page instead of entering a
waypoint.
5. With the right inner knob, position the cursor over Ok?, if it is not already there,
F
and press
button. The Direct To (DIR) page will be displayed with a way-
to confirm.
button to bring the cursor on the page over the INIT POS: field.
.
F
F
-2-
again to confirm.
F
. The display will
again. The display will
D
,