Dymo LabelMANAGER 150 Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembuat label Dymo LabelMANAGER 150. Dymo LabelMANAGER 150 13 halaman. Elektronisches beschriftungsgerät
Juga untuk Dymo LabelMANAGER 150: Panduan Pengguna (13 halaman), Panduan Pengguna (10 halaman), Brosur & Spesifikasi (2 halaman), Petunjuk pengoperasian (Bahasa Jerman) (14 halaman)

Halaman Cetak

2. Use the arrow keys to move to the desired symbol.

The left and right arrows move horizontally along a

row of symbols. The up and down arrow keys scroll

vertically through the rows of symbols. To quickly

see a row of symbols, you can press the letter

corresponding to the row you want.

3. When you locate the desired symbol, press OK to

add the symbol to your label text.

Adding International Characters

The labelmaker supports the extended Latin character

set using RACE technology.Similar to using a mobile

phone keypad, if you type a letter multiple times

within a very short time, you will scroll through

variations on that letter.

For example, if you repeatedly press the letter a, you

will see a à á â ã ä å and so on through all the

variations available. The order in which the character

variations appear depends on the language you have

selected to use.

Printing Options

You can print multiple copies of the same label, print

fixed length labels, review label text and format, and

adjust the printing contrast.

Printing Multiple Copies

You can print up to 16 copies of a label at one time.

When printing multiple copies, a dotted cut-line is

printed between each label.

To print multiple copies of the label

1. Press Extra and then use the arrow keys to select

Copies.

2. Press the Up arrow key to increase the number of

copies to print.

3. Press the Down arrow key to begin decreasing the

number of copies from 16.

4. Press OK.

5. Press Print to begin printing.

You may notice a brief pause in printing

between each label for more complex formats.

When printing is finished, the number of copies to

print returns to the default value of 1.

Previewing Your Label

You can preview the text or format of your label prior

to printing. A two-line label is previewed as a single-

line label.

To preview your label

1. Press Extra.

2. Use the Down arrow key to select Print Preview

and press OK.

3. Use the arrow keys to select Text or Format.

If you select Text, the text of the label scrolls across the

display. If you select Format, the format selected

displays briefly.

Setting a Fixed Label Length

Normally, the length of the label is determined by the

length of the text entered. However, you may wish to

make a label for a specific purpose that is a fixed

length regardless of the length of the text.

You can specify a fixed length for a label in 0.1" (2 mm)

increments between 1.5" (40 mm) and 15.0" (400

mm). The preset fixed length is 1.5" (40 mm). Any

change you make to the fixed length setting remains

in effect until you change it.

To set the label length

1. Press Shift-Font/Fixed Length.

2. Press the Up arrow to increase the length.