Dymo LabelMANAGER 150 Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembuat label Dymo LabelMANAGER 150. Dymo LabelMANAGER 150 13 halaman. Elektronisches beschriftungsgerät
Juga untuk Dymo LabelMANAGER 150: Panduan Pengguna (13 halaman), Panduan Pengguna (10 halaman), Brosur & Spesifikasi (2 halaman), Petunjuk pengoperasian (Bahasa Jerman) (14 halaman)

Halaman Cetak

3. Press the Down arrow to decrease the length.

4. Press OK to set the fixed length.

5. After you print the label, press Clear to turn off the

fixed label length setting; otherwise, all your

subsequent labels will print with this fixed length.

Aligning the Text

When you print a fixed length label you can choose to

align the text at the left, center, or right side of the

label. For two-line labels, both lines of text are aligned

left, center, and right relative to each other.

To align the text

1. Press Shift-Frame/Align.

2. Use the arrow keys to select the desired alignment

and press OK.

3. Press Clear to turn off the alignment setting.

Adjusting the Print Contrast

You can adjust the print contrast to fine tune the print

quality of your label.

To set the contrast

1. Press Extra.

2. Use the arrow keys to select Print Contrast and

press OK.

3. Use the arrow keys to select one of the five contrast

settings and press OK.

Customizing the Printer

You can choose the language you wish to use and the

units of measure.

Selecting the Language

You can select from a number of different language

options for the labelmaker.

To select your language

1. Press Extra.

2. Use the arrow keys to select Set Language and

press OK.

3. Use the Up and Down arrow keys to scroll to the

language you want and press OK.

Selecting Units of Measure

You can choose to show measurements in inches or

millimeters.

To set the units of measure

1. Press Extra.

2. Use the arrow keys to select Set Units and press

OK.

3. Use the Up and Down arrow keys to toggle

between inches and millimeters, and press OK.

Caring for Your Printer

Your labelmaker is designed to give you long and

trouble-free service, while requiring very little

maintenance.

Cleaning the Printer

Clean your labelmaker from time to time to keep it

working properly.

To clean the cutter blade

1. Remove the tape cassette.

2. Insert the tip of a ball-point pen or pencil between

the L-shaped piece and the guide pin.