Dymo RhinoPRO 6000 Panduan Pengguna - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembuat label Dymo RhinoPRO 6000. Dymo RhinoPRO 6000 17 halaman. Electronic labelmaker
Juga untuk Dymo RhinoPRO 6000: Panduan Referensi Cepat (2 halaman)

Halaman Cetak
Dymo RhinoPRO 6000 Panduan Pengguna

Description of keys

The keyboard

PREVIEW
ON/OFF
SIZE
NEW
PRINT
UL/BOX
123...n
LENGTH
COPIES
CASSETTE
ON/OFF
SIZE
PREVIEW
+
SIZE
STYLE
ITALIC
+
STYLE
SYMBOL
BARCODE
+
SYMBOL
PRINT
+
PRINT
10
The keyboard is divided into two distinct areas:
1.
The function keys —
ITALIC
BARCODE
STYLE
SYMBOL
JUSTIFY
MC
WIDTH
M in
COLOUR
SEARCH
VERT
MR
Switches the power on and off. The Labelmaker will switch off
automatically if no keys are pressed after one minute.
The following keys have a dual function. The main function, as
printed on the key top, is performed by simply pressing the key.
For the secondary function, as printed above the key, press and
hold down
Changes the character height. The height is normally adjusted
automatically as you key in the characters (see 'Auto-scaling'). To
change the height manually, press this key repeatedly to step
through the character sizes available, as shown on the display.
Shows a view of the whole label on the display.
A menu appears from which you can select normal (A), bold (A), or
outline
outline (A A
) character styles, as indicated down the right hand side
of the display. The whole label will change to your chosen style.
Changes the whole label into italic text (A), as indicated in the
bottom right hand corner of the display.
Selects from a number of symbol characters. The selected symbol
is inserted into the label at the cursor position.
A menu appears from which you can choose to convert the label
into a barcode label.
Prints the label, then cuts the label at the end.
Feeds out approximately 30mm (1
tape.
followed by the key required.
) of label tape, then cuts the
/ "
1
M
®
DYMO
6000 Labelmaker