Dymo RhinoPRO 6000 Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembuat label Dymo RhinoPRO 6000. Dymo RhinoPRO 6000 17 halaman. Electronic labelmaker
Juga untuk Dymo RhinoPRO 6000: Panduan Referensi Cepat (2 halaman)

Halaman Cetak

Creating your first label

You will no doubt be anxious to see what your new Labelmaker

can do. Before we go on to explore the many advanced features of

the DYMO 6000, follow these simple steps to create your first label.

1. Connect the AC adaptor, plug in and switch on at the wall

socket.

2. Open the cassette compartment lid and check that both the

tape and ink ribbon cassettes are fitted correctly – see Fig. 2.

Ensure tape and

ribbon are positioned

as shown between

print head and pinch

roller.

TAPE

CASSETTE

INK RIBBON

CASSETTE

Print head

Fig. 2— Correct label tape and ink ribbon paths.

If no cassettes are installed, or you need to change one of them,

see 'Changing cassettes', page 28.

3. Close the lid, then press

The display should look like this:

AUTO

to switch the power on.

ON/OFF

DYMO

6000 Labelmaker