Dymo LabelWriter DUO Panduan Memulai Cepat - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Printer Dymo LabelWriter DUO. Dymo LabelWriter DUO 8 halaman. Dymo labelwriter printer quick start
Juga untuk Dymo LabelWriter DUO: Panduan Memulai Cepat (14 halaman), Panduan Memulai Cepat (12 halaman), Ikhtisar (2 halaman), Panduan Pengguna (19 halaman), Panduan Memulai Cepat (6 halaman)
Halaman Cetak
4. Loading Labels
The printer uses two types of labels: die-cut paper labels and D1 tape labels.
To load die-cut labels
1 Press the form-feed button to eject the labels that protected the printer during shipment.
2 Open the top cover and remove the label spool.
3 Hold the spool spindle in your left hand and place the
label roll on the spindle so that the labels feed from
underneath.
4 Place the spool guide on the right side of the spool and
adjust it to fit snugly against the roll. See Figure 7.
5 Insert the label spool into the slots in the printer cover.
6 Cut the first label in half so that you have a clean edge and insert
the label into the label feed slot. See Figure 8.
The printer feeds the labels, stopping at the beginning of the first
label. If the printer stops without feeding the label, make sure the
label is fully inserted and then press the form-feed button.
7 Close the top cover.
6
Figure 7
Figure 8