Gadget Labs WAVE/4 Panduan Pengguna - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kartu Suara Gadget Labs WAVE/4. Gadget Labs WAVE/4 20 halaman. 4 channel pc digital audio card

create at least one audio part by selecting 'Edit | Add part'
n
then, select the menu item, 'Window | Audio setup'. A setup
n
dialog box will appear.
first, configure the Device Setup portion of the dialog box
n
'Stereo' should be checked
n
select a sample rate (e.g. 44 kHz); the higher the rate, the better
n
the sound quality but the bigger the recorded files.
next, the Parts need to be mapped to the audio output devices.
n
make sure the 'Ster.' (stereo) option is checked on each line.
n
assign the Parts to 'Wave/4 Wave OUT Ch1 L+R' or 'Wave/4
n
Wave OUT Ch2 L+R'
Next, assign the input channels by clicking on the button 'Set Input
Devices'. This causes another dialog box to open for mapping Parts to
input devices. Assign the parts to 'Wave/4 Wave IN Ch1 L+R' or
'Wave/4 Wave IN Ch2 L+R'. Finally, to fine tune Musicator, you may
wish to run the audio auto-calibrate function.
Setting up Samplitude for the Wave/4 card
Samplitude is a popular multi-track digital audio program from Ger-
many. Follow these steps to configure the program for the Wave/4
card. Settings not mentioned here can be left at their default values.
The initial step in using Samplitude is to setup a new virtual
n
project (a VIP). To do this, select the menu item 'File | New
Multitrack project'. A dialog box will appear. Choose 'Stereo'
and specify the number of tracks. (Note: these are virtual tracks
and you are not limited to 4. The maximum number of tracks is
determined by the performance capability of your PC).
After the VIP is setup, make sure that 'Multi-card mode' is active
n
(green). This option can also be set with the menu item, 'File |
Properties | Multiple cards'.
Recording: select 'File | Record' or click on the Record button
n
(it's a red circle). The Record dialog box will be displayed.
Make sure that the record mode is set to Stereo.
n
Select the desired Wave/4 IN Device for input.
n
Make sure that 'Playback while Recording' is checked.
n
Set the 'Record Offset' to 0.
n
Samplitude 4 also has a number of buffer settings for digital audio.
These can be left at their default value of 8192. The 'Buffer number'
should be set to 6.
10