Gadget Labs WAVE/4 Посібник користувача - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник користувача для Звукова карта Gadget Labs WAVE/4. Gadget Labs WAVE/4 20 сторінок. 4 channel pc digital audio card

Друкувати сторінку

create at least one audio part by selecting 'Edit | Add part'

then, select the menu item, 'Window | Audio setup'. A setup

dialog box will appear.

first, configure the Device Setup portion of the dialog box

'Stereo' should be checked

select a sample rate (e.g. 44 kHz); the higher the rate, the better

the sound quality but the bigger the recorded files.

next, the Parts need to be mapped to the audio output devices.

make sure the 'Ster.' (stereo) option is checked on each line.

assign the Parts to 'Wave/4 Wave OUT Ch1 L+R' or 'Wave/4

Wave OUT Ch2 L+R'

Next, assign the input channels by clicking on the button 'Set Input

Devices'. This causes another dialog box to open for mapping Parts to

input devices. Assign the parts to 'Wave/4 Wave IN Ch1 L+R' or

'Wave/4 Wave IN Ch2 L+R'. Finally, to fine tune Musicator, you may

wish to run the audio auto-calibrate function.

Setting up Samplitude for the Wave/4 card

Samplitude is a popular multi-track digital audio program from Ger-

many. Follow these steps to configure the program for the Wave/4

card. Settings not mentioned here can be left at their default values.

The initial step in using Samplitude is to setup a new virtual

project (a VIP). To do this, select the menu item 'File | New

Multitrack project'. A dialog box will appear. Choose 'Stereo'

and specify the number of tracks. (Note: these are virtual tracks

and you are not limited to 4. The maximum number of tracks is

determined by the performance capability of your PC).

After the VIP is setup, make sure that 'Multi-card mode' is active

(green). This option can also be set with the menu item, 'File |

Properties | Multiple cards'.

Recording: select 'File | Record' or click on the Record button

(it's a red circle). The Record dialog box will be displayed.

Make sure that the record mode is set to Stereo.

Select the desired Wave/4 IN Device for input.

Make sure that 'Playback while Recording' is checked.

Set the 'Record Offset' to 0.

Samplitude 4 also has a number of buffer settings for digital audio.

These can be left at their default value of 8192. The 'Buffer number'

should be set to 6.