Gadget Labs WAVE/4 Посібник користувача - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник користувача для Звукова карта Gadget Labs WAVE/4. Gadget Labs WAVE/4 20 сторінок. 4 channel pc digital audio card

Друкувати сторінку

Setting up Cool Edit Pro for the Wave/4 card

Cool Edit Pro is a new, multitrack version of the popular Cool Edit

program from Syntrillium. It's a really good tool for recording and

processing digital audio. Here are the steps to configure this applica-

tion the Wave/4 card. Note: Cool Edit Pro is a new application, and we

tested the Wave/4 card with a pre-release version; you may need to

tweak these settings depending on the performance characteristics of

your PC. Any settings not mentioned may be left in their default state.

select the menu item, 'Options | Settings'. A tabbed dialog box

will appear.

click on the 'System' tab

in the section, 'Play/Record Buffer', set 'Total Buffer Size' to:

4 seconds using 8 buffers.

in the 'Wave Cache' section, set the 'Cache Size' to 2048.

click on tab labeled, 'Multitrack'

set 'Playback Buffer Size (response time)' to 0.8 seconds

set 'Playback Buffers' to 10.

set 'Recording Buffer Size' to .5 seconds

set 'Recording Buffers' to 10.

set 'Background Mixing Priority' to 0.8.

click on the 'Devices' tab.

select the Wave/4 devices.

You'll also need to assign the Wave/4 card to individual tracks.

The menu item 'File | New Session' is used to select sample rates and

modes. After a New Session is created, you'll find some small windows

that display Pan (P) and Volume (V) settings. Next to these are 2 small

buttons that are used to select the Playback and the Record devices for

each track. Click on these buttons to assign the Wave/4 devices to

individual tracks.

Setting up Cubase VST for the Wave/4 card

Cubase VST is a powerful MIDI & digital audio program from Steinberg.

Important note: Cubase VST has lots of nice features and power but it

needs a powerful PC to run properly. We recommend your have at least a

233 MHz Pentium® processor (or equivalent) and 64 MB of RAM. Also, have

a large powerful hard disk -- SCSI or EIDE with Ultra DMA.

Here are the steps to configure Cubase VST for the Wave/4 card. Any

settings not mentioned can remain in their default configurations.