GRDIAN Charger Plus Panduan Pengguna - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Uji GRDIAN Charger Plus. GRDIAN Charger Plus 18 halaman. Hardwire kit

STEP 6: CONNECT YOUR ADD-A-FUSE

CONNECTING ADD-A-FUSE TO THE CHARGER PLUS

Make sure your vehicle's electrical system is completely OFF for this step.

BATT+ (YELLOW)

Insert and attach the BATT+ wire to your add-a-fuse by using a crimping tool. Once attached,

plug the add-a-fuse into your constant fuse slot. Make sure to insert the add-a-fuse in the

right direction with the line side to line side as determined in Step 4.

ACC+ (RED)

Insert and attach the ACC+ wire to your add-a-fuse by using a crimping tool. Once attached,

plug the add-a-fuse into your switched slot. Make sure to insert the add-a-fuse in the right

direction with the line side to line side as determined in Step 4.

ATTACHING YOUR GND WIRE TO YOUR GROUND POINT

GND (BLACK)

Wrap the GND wire to your ground point and secure it by bolting it down.

Unscrew the ground point and wrap the GND wire around.

Bolt down to secure.