Gadhouse Dean Panduan Pengguna - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Meja putar Gadhouse Dean. Gadhouse Dean 18 halaman.
Halaman Cetak6. Slide the auto stop switch (6) to ON to operate the auto stop function.
7. At the end of the record, the tone arm (12) will stop automatically. You
must return the tone arm to the tone arm holder manually.
8. When finished playing the turntable, please lock the tone arm holder
(7) by gently pushing to the left and protect the needle by inserting
the stylus guard.
Bluetooth Receiver Function (BT)
1. Press Step Down on the Function Switch (4) to start the Bluetooth
Input function.
2. The Bluetooth indicator (4) flashes White while Bluetooth is begin
ning its search.
3. Activate the Bluetooth function on your Bluetooth device (see the de
vice's user manual).
4. Select "DEAN" on your device for pairing.
5. After successful connection, the Bluetooth indicator LED (4) will
turns to solid white.
6. Enjoy the music from your Bluetooth device (Make sure DEAN turn
table is connected with his Bookshelf Speakers or any external
Speaker via Out put Jacks).
Aux-In function (LINE-IN) (17)
1. Before use this AUX function, make sure the Function Switch is Step
UP position as Turntable mode. This connection is especially useful
in hooking up external devices to the Dean turntable and output with
either external stereo speaker though his RCA line-out (15).
2. Hook one end of the 3.5 mm to the 3.5 mm mini-plug cable into Aux-
in jack (17). (Please note that the turntable function will be immediately
stopped when cable is connected) The other end will plug into the
audio output jack of your device. (For more information on hooking
up the external device, see the device user manual.)
14
OUTPUT
Line-out RCA (15)
Dual RCA to dual RCA cable - To connect the Dean turntable to Gadhouse
Bookshelf speakers or any external speakers system, plug the red and
white connectors on one end of the cable into the red and white line-out
jack (15) on the back of the Dean turntable. The other end of the cable
will plug into the stereo input jacks (RCA) of your selected component
(see the component user manual).
Line-out 3.5mm (16)
1. To connect the Dean turntable to any external speakers (which uses
a 3.5 mm ), first of all connect the 3.5 mm mini-plug cable to Line-out
3.5mm jack (16) on the back of the Dean turntable. The other end
of the cable will plug into Aux input jack (3.5 mm jack) of your
selected component (see the component user manual).
2. To connect any earphones, headphones to DEAN turnable, first of
all connect the 3.5 mm mini-plug cable of your selected device (see
the component user manual) to Line-in 3.5mm jack (17) on the back
of the Dean turntable.
15