Gadhouse Dean Kullanıcı Kılavuzu - Sayfa 8

Pikap Gadhouse Dean için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Gadhouse Dean 18 sayfaları.

Sayfayı Yazdır

6. Slide the auto stop switch (6) to ON to operate the auto stop function.

7. At the end of the record, the tone arm (12) will stop automatically. You

must return the tone arm to the tone arm holder manually.

8. When finished playing the turntable, please lock the tone arm holder

(7) by gently pushing to the left and protect the needle by inserting

the stylus guard.

Bluetooth Receiver Function (BT)

1. Press Step Down on the Function Switch (4) to start the Bluetooth

Input function.

2. The Bluetooth indicator (4) flashes White while Bluetooth is begin

ning its search.

3. Activate the Bluetooth function on your Bluetooth device (see the de

vice's user manual).

4. Select "DEAN" on your device for pairing.

5. After successful connection, the Bluetooth indicator LED (4) will

turns to solid white.

6. Enjoy the music from your Bluetooth device (Make sure DEAN turn

table is connected with his Bookshelf Speakers or any external

Speaker via Out put Jacks).

Aux-In function (LINE-IN) (17)

1. Before use this AUX function, make sure the Function Switch is Step

UP position as Turntable mode. This connection is especially useful

in hooking up external devices to the Dean turntable and output with

either external stereo speaker though his RCA line-out (15).

2. Hook one end of the 3.5 mm to the 3.5 mm mini-plug cable into Aux-

in jack (17). (Please note that the turntable function will be immediately

stopped when cable is connected) The other end will plug into the

audio output jack of your device. (For more information on hooking

up the external device, see the device user manual.)

OUTPUT

Line-out RCA (15)

Dual RCA to dual RCA cable - To connect the Dean turntable to Gadhouse

Bookshelf speakers or any external speakers system, plug the red and

white connectors on one end of the cable into the red and white line-out

jack (15) on the back of the Dean turntable. The other end of the cable

will plug into the stereo input jacks (RCA) of your selected component

(see the component user manual).

Line-out 3.5mm (16)

1. To connect the Dean turntable to any external speakers (which uses

a 3.5 mm ), first of all connect the 3.5 mm mini-plug cable to Line-out

3.5mm jack (16) on the back of the Dean turntable. The other end

of the cable will plug into Aux input jack (3.5 mm jack) of your

selected component (see the component user manual).

2. To connect any earphones, headphones to DEAN turnable, first of

all connect the 3.5 mm mini-plug cable of your selected device (see

the component user manual) to Line-in 3.5mm jack (17) on the back

of the Dean turntable.