Gadhouse Dean Kullanıcı Kılavuzu - Sayfa 7

Pikap Gadhouse Dean için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Gadhouse Dean 18 sayfaları.

Sayfayı Yazdır

CONTROL LOCATORS

13
12
11
18
15
1.
Power & Volume Control Knob
2.
Treble adjustment Knob
3.
Bass adjustment Knob
4.
Bluetooth input LED Indicator
5.
Speed Control Switch
6.
Auto Start-Stop Switch
7.
Tone Arm Holder
8.
Cue lever
9.
Counter Weight
10. DEAN's Dust Cover
11. Stylus
10
4
3
2
1
5
7
16
17
14
12. Tone Arm
13. Platter & Dean's Slip Mat
14. Function Switch (Vinyl and
Bluetooth selection)
15. Line-Out RCA Jacks
(Stereo OUT)
16. Line-Out 3.5mm Jacks
(AUX OUT)
17. Line-In 3.5mm Jacks (AUX IN)
18. Power Supply Jack
12

GETTING STARTED

Unpacking and power source

1. Remove packing material from Dean turntable
2. Remove power adaptor from the gift box of Dean turntable
9
3. Remove tie from adaptor
4. Set the turntable properly on a flat, level surface
5. Open the dust cover (10)
8
6. Remove black-tie wrap from tone arm holder (7)
7. To begin using the turntable, remove the stylus guard by gently pulling
toward yourself from front of needle (11)
8. To continue using the turntable, release tone arm (12) from tone arm
6
holder clip (7) by gently pushing to the right. (However, when finished
playing, please lock the tone arm holder by gently pushing to the left
and protect needle by inserting the stylus guard)
9. Plug the power adaptor into an appropriate wall outlet
10. Plug the small end of the power adaptor into the power jack (18) on
the back of the Dean turntable
11. Let's Dance by turning the Power Control Knob (1) From Left to Right
position

OPERATION

AUDIO INPUT

Turntable function (LP)

1. Turn on the power by turning the Power Control Knob (1) From Left
to Right position. Then, to start turntable function, turn on the turn
table function by step up Function Switch (14).
2. Set the speed control switch (5) to the correct speed of record you
will be playing.
3. Place the record on the turntable, place the Slip mat before you place
the record.
4. Lifting up the cue lever (8), move the tone arm (12) to the desired
starting point on the record, then lower the tone arm (12). The record
will start playing.
5. Adjust the volume control knob (1) to the desired sound level.
13