Gage Bilt GB2581A Manual Petunjuk Asli - Halaman 3

Jelajahi secara online atau unduh pdf Manual Petunjuk Asli untuk Peralatan Gage Bilt GB2581A. Gage Bilt GB2581A 15 halaman. Installation tool

WARNING:

Any other use is forbidden.

The GB2581 is a hydraulic installation tool. It weighs 6 lbs. 10 oz. (3.0 kg). It has a 1.000" (25.4mm) rivet setting stroke and a rated pull

load of 10,700 lbs (47.59kN) @ 7,400 psi. (510.2 bar).

The GB2581A is a hydraulic installation tool. It weighs 6 lbs. 10 oz. (3.0 kg). It has a 1.000" (25.4mm) rivet setting stroke and a rated

pull load of 10,700 lbs (47.59kN) @ 7,400 psi. (510.2 bar).

Normal operating pressure is set at 7,400 psi. (510.2 bar) PULL pressure and 3,200 psi. (220.6 bar) MAX RETURN pressure, enabling

the tool to pull all the fasteners listed on the selection chart without adjusting pressures. Powerunit may be set to the pressures only

needed to pull your specific fastener using pressure setting gauge (942280). The tool comes equipped with 12' hoses and air line

complete with quick disconnects.

NOSE ASSEMBLIES ARE NOT FURNISHED WITH THE TOOL AND MUST BE ORDERED SEPARATELY.

WARNING:

Do not operate in an explosive atmosphere.

The GB2581 and GB2581A can be operated between 0ºF — 118ºF (17.8ºC-47.8ºC)

GB2581 S/N: 1068 AND ABOVE

PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

DESCRIPTION

ENVIRONMENTAL USE

SPECIFICATIONS

Weight

Hyd. pressure req'd

Hyd. Power Source

Hydraulic Oil

Setting stroke

Rated pull load

Noise level

Vibration

- 6 lbs. 10 oz. (3.0 kg)

- 7,400 psi (510.2 bar) PULL

3,200 psi (220.6 bar) MAX RETURN

- GB940 Powerunit or equivalent

- See power unit for hydraulic oil specifications

- 1.000" (25.4 mm)

- 10,700 lbs. (47.59 kN) @ 7,400 psi (510.2 bar)

- 81.5 dB (A)

- Tested– No hazards found.

Rev. 4/17