Gage Bilt GB2581A Оригинальное руководство по эксплуатации - Страница 3
Просмотреть онлайн или скачать pdf Оригинальное руководство по эксплуатации для Инструменты Gage Bilt GB2581A. Gage Bilt GB2581A 15 страниц. Installation tool
Печатать страницу
WARNING:
Any other use is forbidden.
The GB2581 is a hydraulic installation tool. It weighs 6 lbs. 10 oz. (3.0 kg). It has a 1.000" (25.4mm) rivet setting stroke and a rated pull
load of 10,700 lbs (47.59kN) @ 7,400 psi. (510.2 bar).
The GB2581A is a hydraulic installation tool. It weighs 6 lbs. 10 oz. (3.0 kg). It has a 1.000" (25.4mm) rivet setting stroke and a rated
pull load of 10,700 lbs (47.59kN) @ 7,400 psi. (510.2 bar).
Normal operating pressure is set at 7,400 psi. (510.2 bar) PULL pressure and 3,200 psi. (220.6 bar) MAX RETURN pressure, enabling
the tool to pull all the fasteners listed on the selection chart without adjusting pressures. Powerunit may be set to the pressures only
needed to pull your specific fastener using pressure setting gauge (942280). The tool comes equipped with 12' hoses and air line
complete with quick disconnects.
NOSE ASSEMBLIES ARE NOT FURNISHED WITH THE TOOL AND MUST BE ORDERED SEPARATELY.
WARNING:
Do not operate in an explosive atmosphere.
The GB2581 and GB2581A can be operated between 0ºF — 118ºF (17.8ºC-47.8ºC)
GB2581 S/N: 1068 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
DESCRIPTION
ENVIRONMENTAL USE
SPECIFICATIONS
Weight
Hyd. pressure req'd
Hyd. Power Source
Hydraulic Oil
Setting stroke
Rated pull load
Noise level
Vibration
- 6 lbs. 10 oz. (3.0 kg)
- 7,400 psi (510.2 bar) PULL
3,200 psi (220.6 bar) MAX RETURN
- GB940 Powerunit or equivalent
- See power unit for hydraulic oil specifications
- 1.000" (25.4 mm)
- 10,700 lbs. (47.59 kN) @ 7,400 psi (510.2 bar)
- 81.5 dB (A)
- Tested– No hazards found.
3
Rev. 4/17