Hi Sharp HS-CX9W00 Panduan Pengguna - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kamera Keamanan Hi Sharp HS-CX9W00. Hi Sharp HS-CX9W00 4 halaman.

Halaman Cetak

BRIGHTNESS / EXPOSURE

WHITE BAL / BACKLIGHT

GAIN / SENS-UP

●BRIGHTNESS

In Main Menu, adjust camera brightness level by left/right

key to increase/decrease value. Adjust range: 0~100.

●EXPOSURE

In Main Menu, change camera exposure method by left/right key to turn on

or off Auto Lens Control (ALC) function. The Auto Iris function has built in

with DC driver so that user can't modify this option. User can click enter key

to adjust detail parameters of ALC configuration. The ALC setup has many

electronic shutter and slow shutter (FIX x means x/60) levels such as 1/60,

1/100, 1/250/1/500, 1/1000, 1/2000, 1/5000, 1/7000, 1/12000, FIX x12, FIX

x10, FIX x8, FIX x6, FIX x4, FIX x2 for various applications.

Notice：If user select ESC option that will close BACKLIGHT function.

●WHITE BAL

In Main Menu, change camera white balance correction method by left/right

key in WHITE BAL option. There have 4 types function to adjust such as

ATW1, ATW2, AWC and MANUAL. ATW1 is suitable for small deviation like

indoor. ATW2 is suitable for large deviation like outdoor, AWC is calculating

again. MANUAL function can adjust red and blue percentage of white

ingredient for various applications.

●BACKLIGHT

In Main Menu, change camera backlight compensation method by left/right

key in BACKLIGHT option. There have Backlight Compensation (BLC) and

Wide Dynamic Range (WDR) ON/OFF switch function to adjust sensitivity

level of backlight compensation threshold. In addition, BLC setup also

supports HLM function to hide intense light to avoid exposure. AREA

function to adjust ROI (Region of interest) size and position for various

applications.

●GAIN & SENS-UP

Auto gain control with SENS-UP function is helpful especially in dark

environment and user could turn on/off it by left/right key in GAIN option.

The SENS-UP function has many gain levels to improve low-illumination

vision such as auto x2, x4, x6, x8, x10, x12, x14, x16, x24, x32, x64, x128,

x256 for various applications.

SPECIAL -2/3

3.PRIVACY：

Privacy mask mode, User can select privacy area、

area color and transparency.

(1) AREA SEL ：System provide 8 default blocks to modify and

step 1 and 2 is define start-end points of rectangle sharp and

step 3 is decide this block is show or cancel. Press enter key

above 3 seconds to exit this setting page.

(2) AREA COLOR：There have 8 color for user select such as

blue, black, white, yellow, cyan, green, magenta and red.

(3) AREA TRANS：Area transparency level. Adjust range: 0~100.

4.SYNC：

Synchronize mode, user can select internal and line lock for the

different needs.

Notice：The line lock function just for engineer mode only.

5.CAM-ID：

User can name a title for this camera via its OSD system and then

easily find the camera according to this title on the screen.

6.IMAGE CTRL：

User can control image rotation, zoom, sharpness, saturation as below.

(1) MIRROR：Left/Right horizontal reverse.

(2) FLIP：Up/Down vertical reverse.

(3) STILL：Freeze image.

(4) D-ZOOM：Digital zoom in. Adjust range: 1~255.

(5)SHARPNESS ： Sharpness level adjustment. Adjust range:

0~100.

(6)SATURATION ： Saturation level adjustment. Adjust range:

0~100.

SPECIAL -1/3

In Main Menu，Select SPECIAL menu

SPECIAL SETUP

DAY/NIGHT

MOTION DET

PRIVACY

SYNC

CAM-ID

IMAGE CTRL

SYSTEM CTRL

RETURN

1. DAY/NIGHT：

Day / Night (D/N) mode, User can select AUTO、COLOR、B/W

modes for the different needs.

(1) AUTO：According to D/N level and brightness level, camera

will automatically switches between Day or Night mode.

(2) COLOR：Day Mode (Color picture).

(3) B/W：Night Mode (Black-and-white picture).

2. MOTION DET：

Motion detect mode. User can setup a 16x12 motion detect area and

adjust sensitivity level for the different needs. Camera screen will

show MD icon about 5 seconds then motion detection function has

triggered.

(1) MD AREA SETUP：User can select which interested block

by enter key and press above 3 seconds to exit.

(2) SENSITIVITY：Motion detects sensitivity level, Adjust range:

0~100.

SPECIAL -3/3 / RESET/ EXIT

7. SYSTEM CTRL：

User can configure system communication and check

version as below.

(1) RS485ID：Set protocol ID. Adjust range: 0~255.

(2) BAUDRATE：Set communication baud rate speed such as

2400, 4800, 9600, 19200, 38400, 57600.

(3) PROTOCOL：There have PELCO-P and D for setup.

(4) DEFECT：Self diagnostic.

(5) LANGUAGE：English/Chinese mode, default is English.

The late text line is shown model version for update reference.

Notice：The DEFECT function just for engineer mode only.

●RESET

Initial menu's setting back to factory settings.

●EXIT

Exit menu.

COLOR

OFF

INT

OFF