- ページ 3
防犯カメラ Hi Sharp HS-CX9W00のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Hi Sharp HS-CX9W00 4 ページ。
BRIGHTNESS / EXPOSURE
WHITE BAL / BACKLIGHT
GAIN / SENS-UP
●BRIGHTNESS
In Main Menu, adjust camera brightness level by left/right
key to increase/decrease value. Adjust range: 0~100.
●EXPOSURE
In Main Menu, change camera exposure method by left/right key to turn on
or off Auto Lens Control (ALC) function. The Auto Iris function has built in
with DC driver so that user can't modify this option. User can click enter key
to adjust detail parameters of ALC configuration. The ALC setup has many
electronic shutter and slow shutter (FIX x means x/60) levels such as 1/60,
1/100, 1/250/1/500, 1/1000, 1/2000, 1/5000, 1/7000, 1/12000, FIX x12, FIX
x10, FIX x8, FIX x6, FIX x4, FIX x2 for various applications.
Notice:If user select ESC option that will close BACKLIGHT function.
●WHITE BAL
In Main Menu, change camera white balance correction method by left/right
key in WHITE BAL option. There have 4 types function to adjust such as
ATW1, ATW2, AWC and MANUAL. ATW1 is suitable for small deviation like
indoor. ATW2 is suitable for large deviation like outdoor, AWC is calculating
again. MANUAL function can adjust red and blue percentage of white
ingredient for various applications.
●BACKLIGHT
In Main Menu, change camera backlight compensation method by left/right
key in BACKLIGHT option. There have Backlight Compensation (BLC) and
Wide Dynamic Range (WDR) ON/OFF switch function to adjust sensitivity
level of backlight compensation threshold. In addition, BLC setup also
supports HLM function to hide intense light to avoid exposure. AREA
function to adjust ROI (Region of interest) size and position for various
applications.
●GAIN & SENS-UP
Auto gain control with SENS-UP function is helpful especially in dark
environment and user could turn on/off it by left/right key in GAIN option.
The SENS-UP function has many gain levels to improve low-illumination
vision such as auto x2, x4, x6, x8, x10, x12, x14, x16, x24, x32, x64, x128,
x256 for various applications.
9
SPECIAL -2/3
3.PRIVACY:
Privacy mask mode, User can select privacy area、
area color and transparency.
(1) AREA SEL :System provide 8 default blocks to modify and
step 1 and 2 is define start-end points of rectangle sharp and
step 3 is decide this block is show or cancel. Press enter key
above 3 seconds to exit this setting page.
(2) AREA COLOR:There have 8 color for user select such as
blue, black, white, yellow, cyan, green, magenta and red.
(3) AREA TRANS:Area transparency level. Adjust range: 0~100.
4.SYNC:
Synchronize mode, user can select internal and line lock for the
different needs.
Notice:The line lock function just for engineer mode only.
5.CAM-ID:
User can name a title for this camera via its OSD system and then
easily find the camera according to this title on the screen.
6.IMAGE CTRL:
User can control image rotation, zoom, sharpness, saturation as below.
(1) MIRROR:Left/Right horizontal reverse.
(2) FLIP:Up/Down vertical reverse.
(3) STILL:Freeze image.
(4) D-ZOOM:Digital zoom in. Adjust range: 1~255.
(5)SHARPNESS : Sharpness level adjustment. Adjust range:
0~100.
(6)SATURATION : Saturation level adjustment. Adjust range:
0~100.
12
SPECIAL -1/3
In Main Menu,Select SPECIAL menu
SPECIAL SETUP
DAY/NIGHT
MOTION DET
PRIVACY
SYNC
CAM-ID
IMAGE CTRL
SYSTEM CTRL
RETURN
1. DAY/NIGHT:
Day / Night (D/N) mode, User can select AUTO、COLOR、B/W
modes for the different needs.
(1) AUTO:According to D/N level and brightness level, camera
will automatically switches between Day or Night mode.
(2) COLOR:Day Mode (Color picture).
(3) B/W:Night Mode (Black-and-white picture).
2. MOTION DET:
Motion detect mode. User can setup a 16x12 motion detect area and
adjust sensitivity level for the different needs. Camera screen will
show MD icon about 5 seconds then motion detection function has
triggered.
(1) MD AREA SETUP:User can select which interested block
by enter key and press above 3 seconds to exit.
(2) SENSITIVITY:Motion detects sensitivity level, Adjust range:
0~100.
11
SPECIAL -3/3 / RESET/ EXIT
7. SYSTEM CTRL:
User can configure system communication and check
version as below.
(1) RS485ID:Set protocol ID. Adjust range: 0~255.
(2) BAUDRATE:Set communication baud rate speed such as
2400, 4800, 9600, 19200, 38400, 57600.
(3) PROTOCOL:There have PELCO-P and D for setup.
(4) DEFECT:Self diagnostic.
(5) LANGUAGE:English/Chinese mode, default is English.
The late text line is shown model version for update reference.
Notice:The DEFECT function just for engineer mode only.
●RESET
Initial menu's setting back to factory settings.
●EXIT
Exit menu.
13
COLOR
OFF
OFF
INT
OFF