Dawnco STARLOOK- D Manual - Halaman 4

Jelajahi secara online atau unduh pdf Manual untuk Unit distribusi daya Dawnco STARLOOK- D. Dawnco STARLOOK- D 16 halaman.

II. Operation:

A. Unpacking.

Start with unpacking the instrument and check that the following items are in the cardboard

box:

1. STARLOOK- D instrument.

2. Nylon carrying case with shoulder strap.

3. Powersupply 220v/13,5v DC.

5. Carcharger 12v.

6. Adapter BNC-male/F-female.

The instruments keypad, knob and control-button is shown on picture A below. These items

controls the STARLOOK- D.

The power-plug is used when charging or running the instrument with the STARLOOK- D

powersupply.

Mainswitch, power On/Off.

RF-input via the F-connector.

The instrument also has a RS232 connector for connection with a computer.

B. Connection:

Use the mainswitch to turn the instrument On and connect an signal-source via the F-

connector.

After a few seconds warm-up the STARLOOK- D starts showing the frequency spectrum

of 920-2200 MHz on the picture-screen and the main-menu on the LCD-display.

III. Knob and control-button:

Start by pushing the control-button. The text on the LCD-display (upper row) change from

FREQ (frequency) to SPAN (frequency-span). Another push and the display is back in the

FREQ-mode.

DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • [email protected]

(3)