Dawnco STARLOOK- D Manual - Halaman 5

Jelajahi secara online atau unduh pdf Manual untuk Unit distribusi daya Dawnco STARLOOK- D. Dawnco STARLOOK- D 16 halaman.

The control-button handle a few important functions (Should be controlled by this button). It

is important to learn how to use the control-button in order to handle the STARLOOK- D

easy and correct.

The functions of the control-button in the different modes.

Spectrum:

Frequency

Bandwidth(span)

When the STARLOOK- D is in Frequency-mode, the cursor is controlled by the knob.

Try to move the cursor up/down by turning the knob left/right.

D. Information:

The cursors position (frequency), the spectrums startfrequency (920 MHz), the spectrums

stopfrequency (2150 MHz) and bandwidth (1231 MHz) can be read out on the picture-

screen.

The most important measured data , the dB-value, is shown in the middle of the monitor.

Measuring of the tuned in frequency is done continuos and the presentation is being

updated a couple of times per second.

III. Functions

The instrument starts with the MAINMENU where the following functions can be choosed:

After choosen a certain frequency it´s easy to access the TV-mode by pressing button nr 1

"picture" in the Mainemnu.

- The knob controls the frequency-position in this mode but the function change when the

control-button is pushed (the function choosed is displayed on top of the LCD).

The function switch between Frequency and Memory.

Measuring on a certain frequency can be done in this "Picture"-mode (dB-value is shown

in the LCD-display).

DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • [email protected]

Picture-mode:

Frequency

Memory

MAINMENU

TV-mode.

(4)

Digital-mode:

Frequency

Memory