Great day LP500HD Petunjuk

Jelajahi secara online atau unduh pdf Petunjuk untuk Peralatan Perahu Great day LP500HD. Great day LP500HD 2 halaman. Load-a-pup hunting dog

READ ALL INSTRUCTIONS BEFORE USING THE LOAD-A-PUP HD

NOTE: Failure to read instructions before use could result in injury or death.

NOTE: All initial installation adjustments to the LOAD-A-PUP should be made prior to launching boat.

Contents:

1ea –Load-A-Pup (fully assembled), 1 ea–Safety Strap, 2 ea J-

bolts, 2 ea 5/16'' Wing knobs, 2 ea Quick-clip pins.

Step 1. Select side of transom (or side of boat) to mount Load-a-Pup HD.

Step 2. Insert J-bolt through vertical square tube of frame to determine desired height of Load-

a- Pup. (Usually, this would be done to position platform at or just below water level) (SEE

FIGURE 1)

FIG. 1

Step 3. Remove and re-insert the two Quick-clip Pins from the leveling tubes to set the Load-a-

Pup platform to the desired angle. (SEE FIGURE 2)

LOAD-A-PUP

~HUNTING DOG~

MODEL: LP500HD

Instructions for Installation and Use:

FIG. 2