Great day LP500HD Інструкція
Переглянути онлайн або завантажити pdf Інструкція для Човнове спорядження Great day LP500HD. Great day LP500HD 2 сторінки. Load-a-pup hunting dog
READ ALL INSTRUCTIONS BEFORE USING THE LOAD-A-PUP HD
NOTE: Failure to read instructions before use could result in injury or death.
NOTE: All initial installation adjustments to the LOAD-A-PUP should be made prior to launching boat.
Contents:
1ea –Load-A-Pup (fully assembled), 1 ea–Safety Strap, 2 ea J-
bolts, 2 ea 5/16'' Wing knobs, 2 ea Quick-clip pins.
Step 1. Select side of transom (or side of boat) to mount Load-a-Pup HD.
Step 2. Insert J-bolt through vertical square tube of frame to determine desired height of Load-
a- Pup. (Usually, this would be done to position platform at or just below water level) (SEE
FIGURE 1)
FIG. 1
Step 3. Remove and re-insert the two Quick-clip Pins from the leveling tubes to set the Load-a-
Pup platform to the desired angle. (SEE FIGURE 2)
LOAD-A-PUP
~HUNTING DOG~
MODEL: LP500HD
Instructions for Installation and Use:
FIG. 2