HI-FOG 1900 Prosedur Identifikasi dan Koreksi - Halaman 8
Jelajahi secara online atau unduh pdf Prosedur Identifikasi dan Koreksi untuk Sistem irigasi HI-FOG 1900. HI-FOG 1900 18 halaman. A1000 type assembly body with stop valve
Halaman Cetak18/09/2017
Figure 08 illustrates the schematic view of a typical section:
a. Before depressurizing the section, make sure the section where corrective
actions are being carried out is isolated by closing the section valve as
illustrated below. (see Figure 09 ).
Note: Use your hands only to manually open or close the valve. Excessive
force is not required and should not be used.
b. The section can be depressurized from the flushing valve with a flushing
hose (see Figure 05 ). The flushing valves of the sections should be marked
on the HI-FOG sprinkler layout drawings. Flushing valves are equipped with
a flushing valve sign (see Figure 10 ).
Document number 0003301084
Figure 08 : Schematic view of a typical section
Minimess connection
point
SBA section valve
Figure 09 : Section valves
Ver. A
SVA section valve
Page 8 of 18