HI-FOG 1900 Identification And Correction Procedure - Page 8

Browse online or download pdf Identification And Correction Procedure for Irrigation System HI-FOG 1900. HI-FOG 1900 18 pages. A1000 type assembly body with stop valve

Print Page

18/09/2017

Figure 08 illustrates the schematic view of a typical section:

a. Before depressurizing the section, make sure the section where corrective

actions are being carried out is isolated by closing the section valve as

illustrated below. (see Figure 09 ).

Note: Use your hands only to manually open or close the valve. Excessive

force is not required and should not be used.

b. The section can be depressurized from the flushing valve with a flushing

hose (see Figure 05 ). The flushing valves of the sections should be marked

on the HI-FOG sprinkler layout drawings. Flushing valves are equipped with

a flushing valve sign (see Figure 10 ).

Document number 0003301084

Figure 08 : Schematic view of a typical section

Minimess connection

point

SBA section valve

Figure 09 : Section valves

Ver. A

SVA section valve

Page 8 of 18