6K Products DH0606 Panduan Pengoperasian dan Suku Cadang - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengoperasian dan Suku Cadang untuk Peralatan Industri 6K Products DH0606. 6K Products DH0606 17 halaman. 14g36 connect and cut hydraulic chain

Halaman Cetak

After assembling the components as shown in figure 1, position the saw bar square to the log, at the correct height

with clearance between the bar guard and the side of the largest log and weld down solidly (Fig. 4).

Fig. 4

Hydraulic Connections

The hydraulic requirements to operate the saw are 13 to 15 gallons per minute at 2000 psi from a directional control

valve that has port A and B blocked in the neutral position. These pictures are examples of valve spool that will

work.

The hydraulic valve can be manual or electric control. Figure 5 shows hose

connections for correct operation.

Fig. 5