6K Products DH0606 작동 및 부품 설명서 - 페이지 5
{카테고리_이름} 6K Products DH0606에 대한 작동 및 부품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 6K Products DH0606 17 페이지. 14g36 connect and cut hydraulic chain
페이지 인쇄After assembling the components as shown in figure 1, position the saw bar square to the log, at the correct height
with clearance between the bar guard and the side of the largest log and weld down solidly (Fig. 4).
Fig. 4
Hydraulic Connections
The hydraulic requirements to operate the saw are 13 to 15 gallons per minute at 2000 psi from a directional control
valve that has port A and B blocked in the neutral position. These pictures are examples of valve spool that will
work.
The hydraulic valve can be manual or electric control. Figure 5 shows hose
connections for correct operation.
Fig. 5
5