Agrident AIR300 Manual Perangkat Keras - Halaman 6
Jelajahi secara online atau unduh pdf Manual Perangkat Keras untuk Pemindai Agrident AIR300. Agrident AIR300 12 halaman. For motorola workabout pro-g4
Halaman CetakAIR300 Hardware Manual for WAPro-G4
Fix the four screws that were used for mounting the original end cap of the WORKABOUT PRO
into the corresponding holes AIR300 housing.
Insert the battery and attach the cover plate. You may now switch on your WORKABOUT PRO.
Refer to the manual for your management software concerning details about reading
transponders. Please be aware that some registry keys are required to allow Windows loading
the appropriate USB Driver! Please refer to the corresponding documents for details.
3
Reading transponders
If the AIR300 is activated from your software, the LED is blinking red slowly. If a transponder is
being read, the LED color will change to green.
RF is activated but no tag is in range
The green LED is blinking very fast if a tag is read. It is switched on each time the reader
detects the transponder. If your software is switching off the AIR300 directly after reading, you
might only see the LED flashing green once.
26/02/15
RF is activated and a tag is in being read
Page 6 of 12