Agrident AIR300 하드웨어 매뉴얼 - 페이지 6

{카테고리_이름} Agrident AIR300에 대한 하드웨어 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Agrident AIR300 12 페이지. For motorola workabout pro-g4

AIR300 Hardware Manual for WAPro-G4

Fix the four screws that were used for mounting the original end cap of the WORKABOUT PRO

into the corresponding holes AIR300 housing.

Insert the battery and attach the cover plate. You may now switch on your WORKABOUT PRO.

Refer to the manual for your management software concerning details about reading

transponders. Please be aware that some registry keys are required to allow Windows loading

the appropriate USB Driver! Please refer to the corresponding documents for details.

Reading transponders

If the AIR300 is activated from your software, the LED is blinking red slowly. If a transponder is

being read, the LED color will change to green.

RF is activated but no tag is in range

The green LED is blinking very fast if a tag is read. It is switched on each time the reader

detects the transponder. If your software is switching off the AIR300 directly after reading, you

might only see the LED flashing green once.

26/02/15

RF is activated and a tag is in being read

Page 6 of 12