Hi-Force SJS10-M Panduan Petunjuk Pengoperasian dan Keselamatan - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian dan Keselamatan untuk Penyebar Hi-Force SJS10-M. Hi-Force SJS10-M 9 halaman. Hydraulic stepped jaw spreader
Halaman Cetak
Prepared by:- Matthew Hughes
REV NO:-
ECO:-
OPERATION
The inbuilt pump is used to advance the tool and the tool is retracted with the aid of a
spring assisted return function.
Hi-Force SJS10M wedges can be used in any orientation.
In instances where the tool is used for separating a pipe flange, for example to
replace the gasket, it is often advantageous to use two spreading wedges
opposite each other. Please consult your distributor for details.
Be aware that as the tool expands, the wedge protrudes out of the end of the
tool as shown in the diagram. The maximum protrusion of this wedge is 49mm.
Ensure there will be no obstruction beyond the tips of the jaws as the tool is
operated. This will damage the tool and the equipment being worked upon.
Ensure that the wedge step is inserted as far as possible into the components to be
separated. Do not hammer the tool into a gap which is too small.
SJS10-M HYDRAULIC STEPPED JAW SPREADER
OPERATING AND SAFETY INSTRUCTIONS
002
3957
Page 2 of 9
Approved by:-
Mark Dalley
TDS:-
1374
Date:
05/12/12