Hi-Force SJS10-M 작동 및 안전 지침 매뉴얼 - 페이지 2

{카테고리_이름} Hi-Force SJS10-M에 대한 작동 및 안전 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Hi-Force SJS10-M 9 페이지. Hydraulic stepped jaw spreader

Prepared by:- Matthew Hughes

REV NO:-

ECO:-

OPERATION

The inbuilt pump is used to advance the tool and the tool is retracted with the aid of a

spring assisted return function.

 Hi-Force SJS10M wedges can be used in any orientation.

 In instances where the tool is used for separating a pipe flange, for example to

replace the gasket, it is often advantageous to use two spreading wedges

opposite each other. Please consult your distributor for details.

 Be aware that as the tool expands, the wedge protrudes out of the end of the

tool as shown in the diagram. The maximum protrusion of this wedge is 49mm.

Ensure there will be no obstruction beyond the tips of the jaws as the tool is

operated. This will damage the tool and the equipment being worked upon.

Ensure that the wedge step is inserted as far as possible into the components to be

separated. Do not hammer the tool into a gap which is too small.

SJS10-M HYDRAULIC STEPPED JAW SPREADER

OPERATING AND SAFETY INSTRUCTIONS

002

3957

Page 2 of 9

Approved by:-

Mark Dalley

TDS:-

1374

Date:

05/12/12