Active Storage mRAID16 Panduan Memulai Cepat - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Penyimpanan Active Storage mRAID16. Active Storage mRAID16 16 halaman.

Installing storage systems into the cabinet

NOTICE

l  Do not stack components. Install them on guide rails.

l  If you remove controllers and disks to facilitate a move, record the location of each component and its slot in

advance to help when inserting each component back to its correct slot.

l  If the controller is inserted into a different location, a system power-on failure may occur.

Installing mRAID16 and mRAID16 Expansion

Installing mVault75

(1) Install the inner rail.

(2) Mount the mVault75.

When mounting the mVault75, place the side step in the rear of the mVault75 on the front bracket of the ball

bearing guide rails, and slide the mVault75 in the cabinet along the ball bearing guide rails (no manual

alignment is required because the inner rail automatically connects to the middle rail).

Place the side step at

the rear of the system

to the front bracket of

the bear ball guide rail.

Slide the system

horizontally into the

cabinet (the inner rail

and middle rail will be

automatically pushed

into place).

Install mRAID16 Expansion on the guide rails

using the same method as installing the

mRAID16.

(3) Install a cover.

(4) Install the mVault75.