Great Little Trading Alba L4467 Manual - Halaman 10

Jelajahi secara online atau unduh pdf Manual untuk Perabotan Dalam Ruangan Great Little Trading Alba L4467. Great Little Trading Alba L4467 10 halaman. Regular - two door cupboard unit

Halaman Cetak

Vertical Adjustment: Moving the door up and down. (To control the gaps

between the door and the top/bottom panels)

#A1

Hinge Adjustment - For cupboards with cup hinges

Note: 2 people should complete the adjustment. One holding the

door, one adjusting the screws

Ensure one person is

holding the door. Unscrew/

loosen the screws shown

on each hinge of one door.

Do not remove the screws

completely.

Once the screws are

released, move the door to

the required position.

When in the corrected

position, re-tighten the

screws.

Repeat with the second

door.

Lateral/Horizontal Adjustment: Moving the door side to side. (To control

the gaps between the door and the side panels)

#A2

#A3

Forward/backward Adjustment: Moving the door in or out. (To make sure the

doors are flush with the front edge of the side panel)

#A2

Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.

Release screw A2 a little (this is a locking screw).

Then turn A3 screw to adjust the position of the door

(tighten or loosen)

Adjust one hinge at a time.

When correct position is achieved, re-tighten screw A2

on each hinge.

Repeat with the second door

Turn screw A2 a little to adjust the door.

Adjust one hinge at a time.

When correct position is achieved, repeat with the

second door.