Great Little Trading Alba L4467 Посібник - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник для Внутрішнє оздоблення приміщень Great Little Trading Alba L4467. Great Little Trading Alba L4467 10 сторінок. Regular - two door cupboard unit
Друкувати сторінку
Vertical Adjustment: Moving the door up and down. (To control the gaps
1
between the door and the top/bottom panels)
#A1
#A1
#A1
#A1
Hinge Adjustment - For cupboards with cup hinges
Note: 2 people should complete the adjustment. One holding the
door, one adjusting the screws
Ensure one person is
holding the door. Unscrew/
loosen the screws shown
on each hinge of one door.
Do not remove the screws
completely.
Once the screws are
released, move the door to
the required position.
When in the corrected
position, re-tighten the
screws.
Repeat with the second
door.
Lateral/Horizontal Adjustment: Moving the door side to side. (To control
2
the gaps between the door and the side panels)
#A2
#A3
Forward/backward Adjustment: Moving the door in or out. (To make sure the
3
doors are flush with the front edge of the side panel)
#A2
Copyright© 2019 G.L.T.C. Ltd. All rights reserved.
10
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
Release screw A2 a little (this is a locking screw).
Then turn A3 screw to adjust the position of the door
(tighten or loosen)
Adjust one hinge at a time.
When correct position is achieved, re-tighten screw A2
on each hinge.
Repeat with the second door
Turn screw A2 a little to adjust the door.
Adjust one hinge at a time.
When correct position is achieved, repeat with the
second door.