Gaggenau GI 966 760 Manual - Halaman 13

Jelajahi secara online atau unduh pdf Manual untuk Mesin pencuci piring Gaggenau GI 966 760. Gaggenau GI 966 760 14 halaman.

Door Tension Adjustment

After installation of the dishwasher, open

and close the door several times to make

sure that it does so with ease. If the door

closes too quickly or if the door falls open,

the spring tension needs to be adjusted.

To Adjust the Spring Tension

•

Obtain Spring Tension Screws (2) out

of the parts bag (see Figure 3).

•

Insert the screws in the right and left

sides and adjust spring tension as shown

(see Figure 21).

Regular Toe Panel

Installation

• Obtain Toe Panel Screws from the

Dishwasher Installation Kit bag (see

Figure 3).

• Insert screws through the Toe Panel.

• With a Torx screwdriver, fasten screws

and toe panel into dishwasher base.

Leveling the Dishwasher

Raising the Rear

The rear leveling leg is adjusted by turning

the center screw at the front of the

dishwasher.

Raising the Front

The front leveling legs are adjusted by

rotating the leveling legs on the front left

and right sides of the dishwasher.

• Use a screwdriver and tap the end lightly

with a hammer to turn the legs (see

Figure 23).

Note: If additional height is needed:

Shims may be added under the leveler feet.

FINAL ADJUSTMENTS

Adjust screws

on right and

left sides

Figure 21

Figure 22

Figure 23

www.gaggenau.com/us

Torx T 20

ENGLISH - 13