Great Little Trading Lulworth Manual - Halaman 5
Jelajahi secara online atau unduh pdf Manual untuk Perabotan Dalam Ruangan Great Little Trading Lulworth. Great Little Trading Lulworth 13 halaman. Chest of drawers
Juga untuk Great Little Trading Lulworth: Manual (15 halaman), Manual (7 halaman)
Halaman Cetak
Hardware for Step 1:
1x #1 Flat Runner
#12
1x #2 Flat Runner
#12
6x #12 Screws (12mm)
#12
#12
#12
#12
STEP 1:
Working on a protective surface like a carpet or a rug, take panel (A) and
attach flat runner (#2) as shown in position 1 with 3x screws (#12). Flip
panel (A) so that it is in position 2 and attach flat runner (#1) as shown
with 3x screws (#12).
Note: Ensure that the screws attaching the runners are fully secured and lie flat
to allow the drawer to run smoothly.
When in the correct position, the runner wheel will be at the front edge of the
panel.
POSITION 1
POSITION 2
A
A
#2
#1
#12
#1
#2
#12
#12
STEP 2:
Note: You will be building this unit with the back facing up.
Align horizontal divider panel (B) so that the countersunk holes in the
middle of the panel are facing outwards and the 2x small pilot holes on
the long thin edge are facing up.
#12
Insert 2x wooden dowels (#5) into the inner holes on the edge of panel
(A) and slot into panel (B) ensuring that the wheels of the runners are
facing the floor and that runner (#1) is on the left-hand side as shown.
Secure panels together using 2x screws (#6) through panel B.
#12
#12
A
5
The small drill holes on the
edge of Panel B to be facing up.
#5
#1
#5
B
#6
#6
Hardware for Step 2:
2x #5 Wooden Dowels (20mm)
2x #6 Screws (25mm)