Great Little Trading Lulworth 매뉴얼 - 페이지 5
{카테고리_이름} Great Little Trading Lulworth에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Great Little Trading Lulworth 13 페이지. Chest of drawers
Great Little Trading Lulworth에 대해서도 마찬가지입니다: 매뉴얼 (15 페이지), 매뉴얼 (7 페이지)
페이지 인쇄
Hardware for Step 1:
1x #1 Flat Runner
#12
1x #2 Flat Runner
#12
6x #12 Screws (12mm)
#12
#12
#12
#12
STEP 1:
Working on a protective surface like a carpet or a rug, take panel (A) and
attach flat runner (#2) as shown in position 1 with 3x screws (#12). Flip
panel (A) so that it is in position 2 and attach flat runner (#1) as shown
with 3x screws (#12).
Note: Ensure that the screws attaching the runners are fully secured and lie flat
to allow the drawer to run smoothly.
When in the correct position, the runner wheel will be at the front edge of the
panel.
POSITION 1
POSITION 2
A
A
#2
#1
#12
#1
#2
#12
#12
STEP 2:
Note: You will be building this unit with the back facing up.
Align horizontal divider panel (B) so that the countersunk holes in the
middle of the panel are facing outwards and the 2x small pilot holes on
the long thin edge are facing up.
#12
Insert 2x wooden dowels (#5) into the inner holes on the edge of panel
(A) and slot into panel (B) ensuring that the wheels of the runners are
facing the floor and that runner (#1) is on the left-hand side as shown.
Secure panels together using 2x screws (#6) through panel B.
#12
#12
A
5
The small drill holes on the
edge of Panel B to be facing up.
#5
#1
#5
B
#6
#6
Hardware for Step 2:
2x #5 Wooden Dowels (20mm)
2x #6 Screws (25mm)