GREAT OPENINGS DMEX00100 Petunjuk Instalasi - Halaman 2
Jelajahi secara online atau unduh pdf Petunjuk Instalasi untuk Perabotan Dalam Ruangan GREAT OPENINGS DMEX00100. GREAT OPENINGS DMEX00100 2 halaman. Wardrobe tower & pedestal tower
Halaman CetakAdjust the Door Hinges
After leveling the cabinet, examine the gaps between the doors and the cabinet. If the gaps are uneven, the doors
need to be adjusted.
1. Vertical Gaps: To improve the vertical
gap, adjust the Phillips screw.
Tightening the screw will pull the
door toward the center of the cabinet.
Loosening the screw will pull the door
toward the outside edge.
2. Horizontal Gaps: To improve
horizontal gap, loosen the Torx
screws only enough to slide the
hinges. Do not remove the screws
completely. Carefully slide the doors
up or down until the horizontal gap is
uniform. When properly aligned,
tighten the screws.
Phillips screw
adjusts vertical
gap
Torx screws
adjusts horizontal
gap
3. Side Gaps: To improve the door gap at
the side of the cabinet, loosen the side
gap Phillips hinge screw and slide the
hinge back to close the gap, or forward
to increase the gap. Do not remove the
screw. Tighten when finished.
Phillips screw
adjusts side
gap
Page 2 of 2