GREAT OPENINGS DMEX00100 설치 지침 - 페이지 2

{카테고리_이름} GREAT OPENINGS DMEX00100에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. GREAT OPENINGS DMEX00100 2 페이지. Wardrobe tower & pedestal tower

Adjust the Door Hinges

After leveling the cabinet, examine the gaps between the doors and the cabinet. If the gaps are uneven, the doors

need to be adjusted.

1. Vertical Gaps: To improve the vertical

gap, adjust the Phillips screw.

Tightening the screw will pull the

door toward the center of the cabinet.

Loosening the screw will pull the door

toward the outside edge.

2. Horizontal Gaps: To improve

horizontal gap, loosen the Torx

screws only enough to slide the

hinges. Do not remove the screws

completely. Carefully slide the doors

up or down until the horizontal gap is

uniform. When properly aligned,

tighten the screws.

Phillips screw

adjusts vertical

gap

Torx screws

adjusts horizontal

gap

3. Side Gaps: To improve the door gap at

the side of the cabinet, loosen the side

gap Phillips hinge screw and slide the

hinge back to close the gap, or forward

to increase the gap. Do not remove the

screw. Tighten when finished.

Phillips screw

adjusts side

gap

Page 2 of 2