Affordable Wheelchair Lifts KCSPM3648 Panduan Instalasi - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Sistem Pengangkatan Affordable Wheelchair Lifts KCSPM3648. Affordable Wheelchair Lifts KCSPM3648 14 halaman.
Juga untuk Affordable Wheelchair Lifts KCSPM3648: Panduan Pemilik (12 halaman)
_____________________________________________________________________________________
Gates (Re-positioning)
Each gate comes pre-attached to the Platform. While gate and latch styles may
vary, each gate can hinge on either the right or the left side of the
Platform. The default is to hinge on the left side when entering the
Platform from either direction.
This gate is hinged on the left side.
your particular installation site.
Positioning Your Lift
The Lift can be moved with a dolly or a crowbar and some good
old-fashioned muscle. For positioning the lift in a tight space, it might
be helpful to invest in some detachable wheels for moving the
platform base. (Contact Affordable Wheelchair Lifts for wheels.)
maximum platform height.
Once we have the lift in its desired position, slowly raise the platform to the
height of the landing. The goal here is to accomplish two things. First,
we want the
toe shear board all along the Platform's travel, and especially at the
landing. Reposition the lift accordingly.
_____________________________________________________________________________________
You can detach a gate easily and switch the
side it hinges from using the appropriate
wrenches or sockets.
To change the hinge side for a gate, remove
the two bolts and lock-nuts to detach the
gate. Position the gate hinges the way you
want them, then re-insert and fasten the bolts
to re-attach the gate.
Rehinge each gate, as needed, to best suit
Regardless of your method, it's time to move
your lift to its final position. Don't worry about
leveling or bracing the unit just yet. We'll cover
that later.
First, we want to adjust the unit's positioning
relative to the landing and set the lift's
w ant the edge of the Bridge to be around ¼" from the