Affordable Wheelchair Lifts KCSPM3648 Manuale di installazione - Pagina 9

Sfoglia online o scarica il pdf Manuale di installazione per Sistemi di sollevamento Affordable Wheelchair Lifts KCSPM3648. Affordable Wheelchair Lifts KCSPM3648 14.
Anche per Affordable Wheelchair Lifts KCSPM3648: Manuale d'uso (12 pagine)

Stampa la pagina

_____________________________________________________________________________________

Gates (Re-positioning)

Each gate comes pre-attached to the Platform. While gate and latch styles may

vary, each gate can hinge on either the right or the left side of the

Platform. The default is to hinge on the left side when entering the

Platform from either direction.

This gate is hinged on the left side.

your particular installation site.

Positioning Your Lift

The Lift can be moved with a dolly or a crowbar and some good

old-fashioned muscle. For positioning the lift in a tight space, it might

be helpful to invest in some detachable wheels for moving the

platform base. (Contact Affordable Wheelchair Lifts for wheels.)

maximum platform height.

Once we have the lift in its desired position, slowly raise the platform to the

height of the landing. The goal here is to accomplish two things. First,

we want the

toe shear board all along the Platform's travel, and especially at the

landing. Reposition the lift accordingly.

_____________________________________________________________________________________

You can detach a gate easily and switch the

side it hinges from using the appropriate

wrenches or sockets.

To change the hinge side for a gate, remove

the two bolts and lock-nuts to detach the

gate. Position the gate hinges the way you

want them, then re-insert and fasten the bolts

to re-attach the gate.

Rehinge each gate, as needed, to best suit

Regardless of your method, it's time to move

your lift to its final position. Don't worry about

leveling or bracing the unit just yet. We'll cover

that later.

First, we want to adjust the unit's positioning

relative to the landing and set the lift's

w ant the edge of the Bridge to be around ¼" from the