ActiveAid 600 Panduan Pemilik - Halaman 18

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Peralatan Medis ActiveAid 600. ActiveAid 600 19 halaman.

Maintenance

• It is necessary to inspect your Shower/Commode chair at least weekly to ensure it is in safe operating condition.

• Check all fasteners (snap buttons, screws, nuts, bolts, clips, pull pins, handles, etc.) to ensure they are present

and secure.

• Check upholstery for tears and cracks.

• Check belts for fraying, cuts, tears, broken/worn stitching and buckles for cracks or damage.

• Check wheels, casters, and tires for flat spots, cracks, and wear.

• Check wheel locks or caster locks for tightness and proper function.

• Wheel locks may need to be adjusted as tire tread wears.

• Wheel lock fasteners may need to be tightened.

• Ensure hand rims are properly secured to wheels.

• Replace damaged or worn components. Contact your Supplier for repair/replacement of said parts before

continuing use of the shower/commode chair.

• Use only recommended ActiveAid replacement parts; use of any other parts may void your warranty and cause

damage to your device.

Cleaning/Disinfecting

• After each shower use, rinse the device with water to remove soap residue. Using a soft non-abrasive cloth or

sponge, wipe the device down to remove water accumulation and product build up. Allow to dry completely

before storing.

• When cleaning the unit, use a mild detergent with a soft non-abrasive cloth or sponge. Do not use harsh

cleaning solvents or an abrasive cleaning agent.

• Upholstery pads may be cleaned with a non-abrasive, non-alcohol-based soap or sanitized using a bleach

dilution of up to 1:10. Note, many anti-bacterial and disinfectant products contain alcohol and should not be

used on the upholstery, due to the drying effect of the alcohol. Choose a non-alcohol-based sanitizer.

Germicidal wipes that are rated to kill C-difficile spores may be used on the upholstery and the epoxy coated

stainless steel.

• Urethane Coated Fabrics may be cleaned with a sponge or damp cloth to wipe the surface clean with warm

water. As needed, they may be hand washed using warm water and a mild detergent. Do not use bleach. Line

dry. Do not iron. Do not dry clean.

Parts Replacement

When asking your supplier to order replacement parts, please specify the serial number of the 600 unit.

Your Supplier will contact ActiveAid Customer Service to obtain the necessary items for your specific unit.

If you have any questions, please contact your local supplier or call ActiveAid, LLC at 1-800-533-5330 or

1-507-644-2951.