ADEMCO TI110B1 Panduan Pengguna - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem Keamanan ADEMCO TI110B1. ADEMCO TI110B1 18 halaman. Gsm/pstn dual network burglar alarm system

Halaman Cetak

Ⅲ.GSM Module Program and Operation

GSM Module Alarm Receiving Overview:

When alarming, if the local telecommunication line works normally, the alarm system will send

the alarm voice notification out by telephone network and send the SMS notification through

GSM network; While if the normal telephone cannot works normally, the GSM module will send

alarm SMS to the users' cells first to inform them the alarming zone and alarm type. And then it

will dial the alarm receiving numbers in order and circularly to send all the alarm voice

notification. After the alarm voice notification, you are allow to listen-in the local for you to catch

more criminal plots

Alarm SMS format Demonstration:

Alarm Location: Protected Business Center

Alarm Zone: 007

Alarm Type: Steal

Note: it is unnecessary for you to turn on the "Program" switch to do all the GSM program items.

But please make sure that before all program items; the "Power" switch is turn on.

1. Program cell phone Login

Program Password Initialization: Press the "

." button for 3-5 seconds, and you will see the

Init

SIM Signal Strength indicator shine twice. It means that you have initialized the password

successfully. (Note: the original password: 888888)

Log the user's cell phone into the alarm panel first, and make it be the program cell phone.

Meantime, it becomes the No.0 group of telephone number. And other alarm receiving numbers

and other functions only can be set by this program cell phone. (Note: the No.0 group of telephone

number will not receive the alarm information)

Operation steps: Use the user's cell phone to edit "888888*70*XXXXX...X*" to the GSM SIM

card. And then the program cell phone will get a short message"0—XXXXX...X"and "You are

welcome " ,which means the program cell phone is set successfully . (Note: "888888"----original

password; "XXXXX...X"------program cell phone)

Important Note:

⑴ The GSM SIM number should activate caller ID display function. And other additional

functions should be cancelled. Otherwise, the user cell phone will not log into normally.

⑵ If another cell phone log into the alarm panel successfully to be program cell phone , the

former program cell phone will be covered by the latest program cell phone automatically and it

cannot do the programming again. If the new program cell phone doesn't restore new alarm

receiving numbers, the numbers set by the former program cell phone still can receive the alarm

information when alarming. Otherwise, the former alarm receiving numbers will be covered by

new ones.

2. Program Original Password Modification

（1）Method 1:

Use the program cell phone to edit "Original Password*New Password*" and

. And t

send it to GSM SIM card

he GSM SIM card will send the new password to program cell

phone.