DAYTAI DT-OLS-116 Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Pencahayaan DAYTAI DT-OLS-116. DAYTAI DT-OLS-116 16 halaman. Optical light source

Halaman Cetak

Connect the AC adaptor with the port

4.3 Top

(1) Dust cap

In order to protect the optical connector, avoid damage on the connector, so when not in use make sure that

you place the dust cap over the connectors.

(2) Optical Connector

The standard of this optical connector is FC/PC(4-4), can connect with FC/PC adaptor.

Notice: the tinny dust on the connector will affect the accurate of the measurement value, so

please clean the connector and the patch cord end-face before do the test.

Use the alcohol and the cotton swab to clean the connector. Dip the cotton swab with alcohol, insert the

cotton swab in the connector, slightly rotating the cotton swab, after that change a dry cotton swab and

4-5)

clean it again.(

Optical Light Source (DT-OLS-116)

4-2

4-3

4-4 FC/PC connector

4-5

(1)

(2)

Cotton Swab