DAYTAI DT-OLS-116 사용자 설명서 - 페이지 7

{카테고리_이름} DAYTAI DT-OLS-116에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DAYTAI DT-OLS-116 16 페이지. Optical light source

Connect the AC adaptor with the port

4.3 Top

(1) Dust cap

In order to protect the optical connector, avoid damage on the connector, so when not in use make sure that

you place the dust cap over the connectors.

(2) Optical Connector

The standard of this optical connector is FC/PC(4-4), can connect with FC/PC adaptor.

Notice: the tinny dust on the connector will affect the accurate of the measurement value, so

please clean the connector and the patch cord end-face before do the test.

Use the alcohol and the cotton swab to clean the connector. Dip the cotton swab with alcohol, insert the

cotton swab in the connector, slightly rotating the cotton swab, after that change a dry cotton swab and

4-5)

clean it again.(

Optical Light Source (DT-OLS-116)

4-2

4-3

4-4 FC/PC connector

4-5

(1)

(2)

Cotton Swab