Celect CC852KIT Buku Petunjuk - Halaman 4

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Termostat Celect CC852KIT. Celect CC852KIT 10 halaman. Rf programmable thermostat

Halaman Cetak
1. Installation Location:
Transmitter: should be mounted on an inner wall ~1.5m
above the floor in position where it is readily affected by
change of the room temperature with freely circulating air.
Do not place the unit at a location where air circulation is
low, or where it has great temperature changes (e.g. near
door or heating source) irrespective of the current setting
temperature.
Prevent direct exposure to sunlight; dripping or splashing
area.
3
J. Temperature Setting
Press
or
once to activate the temperature
setting. the setting temperature will be flashing.
Press
or
to increase or decrease the setting
temperature. The set point will be saved for the current
operation mode. (Comfort / Econ / Override)
Temperature Setting for Comfort Mode
Hold
until the temperature is flashing.
Press
or
to increase or decrease the comfort
mode temperature.
Temperature Setting for Econ Mode
Hold
until the temperature is flashing.
Press
or
to increase or decrease the econ
mode temperature.
16